For vertical shearing machine, because it is a website product and keywords, so in its familiarity, at least to achieve a comprehensive level, so it can. Then, compared with this specific requirement, we find that there are still many omissions or deficiencies. Therefore, in the next time, we will carry out their learning work in order to make up for the omissions and improve our knowledge system.

1. Can longitudinal shears be operated manually? In addition, what are the main parameters?

縱剪機，其是可以實現無人工操作的，采用機器人換刀技術，來提高設備的自動化水平程度，這樣，可以達到上述目的了。而縱剪機的參數，其主要是有規格參數和技術參數這兩個部分。所以，在設備配置上，應根據具體參數，來進行選擇和確定。

Longitudinal shears, which can be operated by no man, adopt robot tool changing technology to improve the level of automation of equipment, so that the above purpose can be achieved. And the parameters of the longitudinal shear mainly include two parts: specifications and technical parameters. Therefore, the equipment configuration should be selected and determined according to the specific parameters.

2.縱剪機中的刀片，其是否會有磨損？

2. Will the blades in the longitudinal shears wear out?

縱剪機中，刀片是一重要部分，而其在使用過程中出現磨損，是為正?，F象。不過，如果是過度磨損的話，則是不正常的。所以，在刀片的選擇上，應選擇質量好的，這樣，可以降低其磨損程度，并同時，延長刀片的使用壽命。

The blade is an important part of the longitudinal shear machine, and its wear and tear in use is a normal phenomenon. However, if it is excessive wear and tear, it is abnormal. Therefore, in the choice of blades, we should choose good quality, so as to reduce its wear and tear, and at the same time, extend the service life of the blade.

3.縱剪機，其在產品要求上，高嗎？

3. Longitudinal shears, in terms of product requirements, is it high?

縱剪機，其對產品要求，主要是看用戶要求了，如果用戶對產品要求比較高的話，那么相應的，在縱剪機要求上，是比較高的，反之，則是相反的。所以，在這個問題上，不好回答。只能說，如果縱剪機上有對中系統和張力結構的話，那么，該設備性能是非常好的。

Longitudinal shearing machine, its product requirements, mainly depends on the user requirements, if the user requirements for products are relatively high, then the corresponding, in the vertical shearing machine requirements, is relatively high, on the contrary, is the opposite. Therefore, it is difficult to answer this question. It can only be said that if there is a center system and tension structure on the vertical shear, then the performance of the equipment is very good.

上述這些問題，都是與縱剪機這一網站產品有關的，所以，給出了具體答案，好讓大家通過學習，來有正確認識，并知道怎樣來正確回答，而不是不知所措。而且，也只有這樣，才能提升該設備的使用效果，以及其經濟效益。

These questions are all related to the vertical shears, which is a website product. Therefore, specific answers are given so that you can have a correct understanding through learning and know how to answer them correctly, instead of being confused. Moreover, only in this way can the use effect of the equipment be improved and its economic benefits be improved.